This custom command center is built on a 8.5ft wide, 44ft. long trailer shell and features three flat floor slide-outs for maximum interior workspace. There are two entry points into the trailer on the curbside. There is a leveling system to stabilize the trailer while deployed. Belly storage compartments are also added for gear. A larger exterior monitor compartment has been added to house a 55″ display monitor.

Inside, the floorplan consists of a front sitting area, lavatory, central workroom and a rear conference/work area. The front room is located above the gooseneck and has a fixed and flip down bench seat. We added commercial grade storage cabinets and a refrigerator. The fully equipped lavatory has a pressurized water supply, shower, toiler and sink. We added a galley with microwave, large refrigerator and a sink. The work room has spider base task seating for staff members and additional storage cabinetry. We prewired and installed communications radios as well. A fixed center table can be used for meetings and to review drawings and maps as needed. A 65″ TV is on a swing out mount. A large electronics rack has been included to house all of the installed equipment. The rear work room has two dedicated workstations with four monitors each. The conference table has four spider base task chairs.

Additional features include dry erase writing surface on overhead cabinets, LED under cabinet lights, magnetic surface dry erase white boards, five ducted low profile rooftop A/C units and a 20kW liquid cooled generator to supply the electric power needed.