This mobile command center is built on a Freightliner M2 112 conventional cab, tandem rear axle truck chassis with a 12.8L engine and a 4,000 EVS automatic transmission with PTO provision. Featuring an all aluminum body with (3) in-house fabricated slide-outs and (2) of our in-house fabricated Extreme Duty body storage compartments. A weatherproof exterior workstation with a 43″ wall mounted monitor has been added. A complete emergency lighting and siren package have also been installed along with bright LED scene lighting. A vehicle leveling system has also been added.
Entries into the vehicle are from cab or rear entry door. Inside the cab a LED dome lights up the area and we installed a custom fabricated console that includes a radio, LDV’s Intel-I-Touch™ which gives you easy access to your vehicle’s controls, and other vehicle controls. A pocket door has also been added. Inside the body, the first room includes a conference table with 7 chairs, workstation #1 with an intercom and radio, bench seats with a fold up countertop, (2) 55″, (1) 49″, (2) 24″ wall mounted monitors with a control panel, (4) magnetic dry erase boards, and a clock.
Behind the curtain leads to the second room where you’ll find workstations two through five with a 32″ and (9) 24″ wall mounted monitors, an HDMI video matrix switcher, (4) communications radios, (2) magnetic dry erase boards, a printer, and a clock.
We added another pocket door which leads to the third room. Here you’ll find a firearms locker, dual electronics racks, a lavatory with a mirror, a galley with a refrigerator, microwave, sink, and paper towel holder. An additional Intel-I-Touch™ touchpanel has also been installed in this area.
A 3-speed reversible 12″ power roof ventilator has been installed. Low profile rooftop A/C units keep the mobile command center cool in the summer. Heat is supplied throughout the interior with a 6,000 Btu/hr heat strip. A powerful liquid cooled generator supplies plenty of electric power to the vehicle.
Vehicle Details
- Freightliner M2 112 conventional cab
- All aluminum body
- (3) In-house fabricated flat floor slide-outs
- Entries into the vehicle are from cab or rear entry door
- (3) Rooms
- (2) Extreme Duty body storage compartments
- Vehicle leveling system
- Internal mast
- Emergency lighting and siren package
- LED scene lighting
- (2) LDV Intel-I-Touch™ vehicle automation touchpanels
- Weatherproof exterior workstation with a 43″ wall mounted monitor
- (5) Interior workstations
- (6) Radios and an intercom
- A conference table with (7) chairs
- Bench seats with a fold up countertop
- (2) 55″, (1) 49″, (1) 32″, (11) 24″ wall mounted monitors
- Pistol locker and an electronics rack
- (2) Extron control panels
- Commercial grade aluminum cabinetry
- (2) Clocks
- (6) Magnetic dry erase writing surfaces
- (2) Magnetic soft close pocket doors
- Multi-function printer on a slide out tray
- Lavatory with a mirror
- Galley w/ microwave, refrigerator, sink, paper towel holder

SUPPORT AND RESOURCES
Have a question? We’ve got answers..













